OSCam r11232 orange revenge 2 card not work on oscam

problem cannot iniit the card and i get ERROR (no entitlements)

full log

(reader) Reader-0 [mouse] IFD: Opening device /dev/ttyUSB0 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] IO: Setting RTS=1 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:10 7070AF22 h (webif) WebIf: Origin checked. Result: access from 192.168.1.4 => allowed 2016/05/03 23:13:10 4E0DA136 r (-) -- Skipped 1 duplicated log lines -- 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=75000 us 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] Buffers readed 0 bytes total time_us 75209 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] IFD: Initializing reader type=5 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] IO: custom baudrate: cardmhz=2700 mhz=450 custom_baud=1600 baud_base=24000000 divisor=15000 -> effective baudrate 1600 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] IO: Getting readerstatus... 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] IO: Set reader ready to Send 2016/05/03 23:13:10 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=75000 us 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] Buffers readed 0 bytes total time_us 75188 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IFD: Device /dev/ttyUSB0 succesfully opened 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz) 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] Reader sci internal, detected box type: generic 2016/05/03 23:13:11 7070AF22 h (webif) WebIf: Origin checked. Result: access from 192.168.1.4 => allowed 2016/05/03 23:13:11 00000000 (main) starting thread client work 2016/05/03 23:13:11 00000000 (main) client work thread started 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] card detected 2016/05/03 23:13:11 4E0DA136 r (work) add reader job action 4 queue length 1 Reader-0 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] cardreader_do_checkhealth: reader->card_status = 1, ret = 0 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IFD: Activating card 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IFD: Resetting card 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IFD: Setting baudrate to 9600 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IO: custom baudrate: cardmhz=2700 mhz=450 custom_baud=1600 baud_base=24000000 divisor=15000 -> effective baudrate 1600 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IO: Getting readerstatus... 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IO: Set reader ready to Send 2016/05/03 23:13:11 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=75000 us 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] Buffers readed 0 bytes total time_us 75182 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] IO: Setting RTS=1 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] IO: Setting RTS=0 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 1000000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] IO: Receiving: 2016/05/03 23:13:12 4E0DA136 r (reader) 3B 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 1000000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] IO: Receiving: 2016/05/03 23:13:12 4E0DA136 r (reader) 00 2016/05/03 23:13:12 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 1000000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:12 7070AF22 h (webif) WebIf: Origin checked. Result: access from 192.168.1.4 => allowed 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000000 us 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] ATR: 3B 00 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] no TD1 means T0 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] 1 protocol types detected. Historical bytes: 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] No PTS needed, selected protocol T0, F=372, D=1, N=0 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IO: PLL maxmhz = 27.00, wanted mhz = 4.50, divider used = 6, actualcardclock=4.50 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] Setting baudrate to 72580 bps 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IFD: Setting baudrate to 72580 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IO: custom baudrate: cardmhz=2700 mhz=450 custom_baud=12096 baud_base=24000000 divisor=1984 -> effective baudrate 12096 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IO: Getting readerstatus... 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IO: Set reader ready to Send 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] Calculated work ETU is 82.67 us reader mhz = 450 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] Protocol: T=0, WWT=9600, Clockrate=4500000 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] Setting timings: timeout=9600 ETU, block_delay=0 ETU, char_delay=12 ETU 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IFD: Setting right parity 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=75000 us 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] Buffers readed 0 bytes total time_us 75165 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 4.50 MHz (specified in reader->mhz) 2016/05/03 23:13:13 4E0DA136 r (reader) Reader-0 [mouse] IFD: Card succesfully activated 2016/05/03 23:13:13 7070AF22 h (webif) WebIf: Origin checked. Result: access from 192.168.1.4 => allowed 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] failed history check 2016/05/03 23:13:14 4E0DA136 r (-) -- Skipped 1 duplicated log lines -- 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] card system not supported 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] Normal mode failed, reverting to Deprecated Mode 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IFD: Activating card 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IFD: Resetting card 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IFD: Setting baudrate to 9600 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: custom baudrate: cardmhz=2700 mhz=450 custom_baud=1600 baud_base=24000000 divisor=15000 -> effective baudrate 1600 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Getting readerstatus... 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Set reader ready to Send 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=75000 us 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] Buffers readed 0 bytes total time_us 75193 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Setting RTS=1 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Setting RTS=0 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 1000000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Receiving: 2016/05/03 23:13:14 4E0DA136 r (reader) 3B 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 1000000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Receiving: 2016/05/03 23:13:14 4E0DA136 r (reader) 00 2016/05/03 23:13:14 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 1000000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:14 7070AF22 h (webif) WebIf: Origin checked. Result: access from 192.168.1.4 => allowed 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000000 us 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] ATR: 3B 00 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] no TD1 means T0 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] 1 protocol types detected. Historical bytes: 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] No PTS needed, selected protocol T0, F=372, D=1, N=0 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] IO: PLL maxmhz = 27.00, wanted mhz = 4.50, divider used = 6, actualcardclock=4.50 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] Calculated work ETU is 82.67 us reader mhz = 450 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] Protocol: T=0, WWT=9600, Clockrate=4500000 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] Setting timings: timeout=9600 ETU, block_delay=0 ETU, char_delay=12 ETU 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] IFD: Setting right parity 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s) 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=75000 us 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] Buffers readed 0 bytes total time_us 75174 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 4.50 MHz (specified in reader->mhz) 2016/05/03 23:13:15 4E0DA136 r (reader) Reader-0 [mouse] IFD: Card succesfully activated 2016/05/03 23:13:15 7070AF22 h (webif) WebIf: Origin checked. Result: access from 192.168.1.4 => allowed 2016/05/03 23:13:16 4E0DA136 r (reader) Reader-0 [mouse] failed history check 2016/05/03 23:13:16 4E0DA136 r (-) -- Skipped 1 duplicated log lines -- 2016/05/03 23:13:16 4E0DA136 r (reader) Reader-0 [mouse] card system not supported 2016/05/03 23:13:16 4E0DA136 r (reader) Reader-0 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 2016/05/03 23:13:16 4E0DA136 r (reader) Reader-0 [mouse] card initializing error